Front Wheel Speed Sensor Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative cable from battery.
- Hoist vehicle and remove wheel.
- Disconnect front wheel speed sensor connector (1).
- Remove harness clamp bolts (2) and sensor bolt (3) and remove front wheel speed sensor (1) from knuckle.CAUTION:
- Do not pull wire harness when removing front wheel speed sensor.
- Do not cause damage to surface of front wheel speed sensor and do not allow dust, etc. to enter its installation hole.