Fuel Pressure Regulator Removal And Installation: Installation

WARNING: This page is about a different car, the 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

For installation, reverse removal procedure and note the following precautions.

Use new O-ring (1).
Apply thin coat of gasoline to O-ring (1) to facilitate installation.
Tighten fuel pressure regulator bolts to specified torque.
Tightening torque
1. Fuel pressure regulator bolt (a) 10 N.m (1.0 kg-m, 7.5 lb-ft)
With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.

Fig 1: Applying Thin Coat Of Gasoline To O-Ring To Facilitate Installation
Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Tightening Fuel Pressure Regulator Bolts
Courtesy of SUZUKI OF AMERICA CORP.