Manifold Absolute Pressure Sensor: Aerio
- Disconnect MAP sensor from connector and remove. Measure voltage between "Vout" and "Ground" according to test procedures found in Fig 1 . Refer to MAP SENSOR OUTPUT SIGNAL (AERIO) for voltage specifications and test conditions.
- If voltage is not within specification, replace MAP sensor.MAP SENSOR OUTPUT SIGNAL (AERIO)
Altitude (Feet) Vacuum (In. Hg) Output Voltage 0-2000 29.9-27.8 3.3-4.3 2001-5000 27.8-24.9 3.0-4.1 5001-8000 24.9-22.3 2.7-3.7 8001-10,000 22.3-20.7 2.5-3.3