LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> XL-7 Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Auxiliary Emission Control Devices >> H25 Engine >> Repair Instructions >> Vapor Control Valve Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vapor Control Valve Removal and Installation: Installation

  1. Clean mating surface of refuel vapor control valve (1) and fuel tank.
  2. Install new gasket (2) to vapor control valve (1) and then vapor control valve (1) to fuel tank.
    CAUTION: At this time, align screw holes in fuel tank gasket and plate accurately, or vapor may leak.

    Tightening torque 

    1. Vapor control valve screw (a):  1.6 N.m (0.16 kg-m, 1.0 lb-ft)
  3. Connect hoses to vapor control valve (1) and clamp them securely.
    Fig 1: Installing Vapor Control Valve
    G01374962Courtesy of SUZUKI OF AMERICA CORP.
  4. Install fuel tank to vehicle body, referring to FUEL TANK REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals