Remote Audio Control Switch Inspection
- Remove driver air bag (inflator) module referring to AIR BAG RESTRAINT SYSTEMS .
- Disconnect remote audio control switch connector from contact coil.
- Check switch (1) for resistance between "a" and "b" terminals under each condition below. If check result is not satisfactory, replace remote audio control switch.
"MUTE", "+" and "-" switch resistance
All switches released (OFF): 90 - 110 kΩ
"MUTE" switch pushing on (ON): 300 - 360 Ω
"+" switch pushing on (ON): 900 - 1100 Ω
"-" switch pushing on (ON): 2900 - 3500 Ω
- Check switch (1) for resistance between "a" and "c" terminals under each condition below. If check result is not satisfactory, replace remote audio control switch.
"MODE", "<" and ">" switch resistance
All switches released (OFF): 90 - 110 kΩ
"MODE" switch pushing on (ON): 300 - 360 Ω
"<" switch pushing on (ON): 900 - 1100 Ω
">" switch pushing on (ON): 2900 - 3500 Ω