Sliding Roof Assembly Removal And Installation: Installation

For installation, reverse removal procedure, noting the following points.

Align positioning holes (3) in sliding roof assembly (2) at right and left and pins (1) on body side for installation.

Fig 1: Installing Sliding Roof Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Connect drain hoses (1) to sliding roof assembly at 4 locations. Pass front drain hose between roof panel and inner panel and through front pillar down to sill side. Pass rear drain hose into baring hole in rear quarter inner panel and through C pillar down to jig hole in rear side bumper

NOTE: After reinstalling sliding roof assembly, be sure to make glass adjustment. (Refer to SLIDING ROOF GLASS REMOVAL AND INSTALLATION .)

Fig 2: Connecting Drain Hoses

Courtesy of SUZUKI OF AMERICA CORP.