Testing Automatic Stop Action
- First, connect battery (+) terminal ("Red" lead wire (3)) to terminal "D" and battery (-) terminal to "Black" lead wire (4) and let the motor (2) turn.
- Then disconnect terminal "D" from battery (1) and let the motor (2) stop.
- Next connect terminal "D" and terminal "A" with a jumper wire (5) and connect terminal "B" to battery (+) terminal. Observe the wiper motor (2) turns once again, then stops at a given position.
- Repeat these steps several times, and inspect if the motor (2) stops at the given position every time.
Courtesy of SUZUKI OF AMERICA CORP.