Fuel Pressure Regulator Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

For installation, reverse removal procedure and note the followings.

Use new O-ring.
Apply thin coat of gasoline to O-ring to facilitate installation.

Fig 1: Installing Fuel Return Hose To Fuel Pressure Regulator
Courtesy of SUZUKI OF AMERICA CORP.
Tighten fuel pressure regulator bolts to specified torque.
Tightening torque

Fuel pressure regulator bolt (a): 10 N.m (1.0 kg-m, 7.5 lb-ft)

Fig 2: Tightening Fuel Pressure Regulator Bolt
Courtesy of SUZUKI OF AMERICA CORP.
With engine OFF and ignition switch ON, check for fuel leaks around fuel line connection.