LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> XL-7 Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Overhaul) >> Repair Instructions >> Gear Shift Lever Case Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gear Shift Lever Case Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove case plate.
  2. With case supported with soft jawed vise, remove lever locating bolts (6).
    NOTE: Use aluminum plates between vise and case to protect case against damage.
    Fig 1: Removing Lever Locating Bolts
    G01325918Courtesy of SUZUKI OF AMERICA CORP.
  3. Using special tool, drive spring pin into gear shift arm (5) as far as the position shown in the figure.
    CAUTION: When driving spring pin (2), use care not to damage gear shift lever case (1).

    Special tool 

    1. (A):  09922-85811
  4. Likewise, drive spring pin (2) into gear shift lever (3) as far as the position shown in the figure.
    CAUTION: When driving spring pin (2), use care not to damage gear shift lever case (1).

    Special tool 

    1. (A):  09922-85811
  5. Remove case plug (7).
  6. Pull out gear shift shaft (4) from gear shift lever case (1) and take out gear shift lever (3).
scientia non olet · About LEMON Manuals