LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> XL-7 Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Overhaul) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> J << Plug Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> J << Plug Installation

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring to the groove of the front case.
  2. Install the plug to the front case.
    Fig 1: Installing Plug To Front Case
    G01867948Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Fit special tool MD998162 on the plug, and then hold it in position with special tool MD998783.
  4. Tighten the plug to the specified torque.
    1. Tightening torque: 24 +/- 3 N.m (17 +/- 2 ft-lb)<
  5. Remove special tools MD998783 and MD998162.
scientia non olet · About LEMON Manuals