EVAP Canister Removal and Installation: Removal
- Hoist vehicle.
- Remove EVAP canister (1) with its bracket (2).
Courtesy of SUZUKI OF AMERICA CORP.
- Disconnect tank hose, purge hose and refuel vapor control valve hose from EVAP canister. For quick joint, disconnect it as follows:
- Remove mud or rust around joint by blowing compressed air, and push joint fully in arrow direction.
- Disconnect hose joint while joint lock is unlocked by pushing both sides of joint.
- Remove EVAP canister bolts.
- Disconnect air valve hose from EVAP canister.