EVAP Canister: Installation

Install EVAP canister to bracket.
Install EVAP canister with its bracket (1) to vehicle. See Fig 2 .
Connect vent valve wire harness connector.
Connect purge hose, vent valve hose and refuel vapor control valve hose to pipes, and clamp them securely. For quick joint, push joint into pipe until joint lock clicks.

Fig 1: Removing EVAP Canister (Aerio)

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Installing EVAP Canister (Aerio)

Courtesy of SUZUKI OF AMERICA CORP.

Connect air valve hose to EVAP canister.
Install EVAP canister (1) to its bracket. See Fig 1 .
Connect tank hose, purge hose and refuel vapor control valve hose to EVAP canister (1), and clamp then securely. For quick joint, push joint into pipe till joint lock clicks. See Fig 1 .

Fig 1: Identifying EVAP Canister & Bracket (Grand Vitara & XL-7)

Courtesy of SUZUKI OF AMERICA CORP.