Fuel Pressure Regulator Removal and Installation: Installation

For installation, reverse removal procedure and note the following .

• Use new O-ring.
• Apply thin coat of gasoline to O-ring to facilitate installation.
  Fig 1: Identifying O-Ring

  Courtesy of SUZUKI OF AMERICA CORP.
• Tighten fuel pressure regulator (1) bolts to specified torque.

  Tightening torque 

  1. Fuel pressure regulator bolt (a):  10 N.m (1.0 kg-m, 7.5 lb-ft)
  Fig 2: Installing Fuel Pressure Regulator

  Courtesy of SUZUKI OF AMERICA CORP.
• With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.