Steering Lock Assembly (Ignition Switch) Removal and Installation: Removal

Remove steering column assembly. Refer to STEERING COLUMN REMOVAL AND INSTALLATION .
Using center punch (with sharp point) (1) as shown in the figure, loosen and remove steering lock mounting bolts (2).
NOTE: Use care not to damage aluminum part of steering lock body (3) with center punch (1).

Fig 1: Loosening & Removing Steering Lock Mounting Bolt

Courtesy of SUZUKI OF AMERICA CORP.

Turn ignition key to "ACC" or "ON" position and remove steering lock assembly (3) from steering column assembly (4).