Clutch Switch: Testing and Inspection

Clutch Pedal Position (CPP) Switch (for Cruise Control) Inspection and Adjustment

Inspection




Check for resistance between terminals under each condition below. If check result is not satisfactory, replace.

CPP switch (for cruise control) resistance
When switch shaft is pushed (1): No continuity
When switch shaft is free (2): Continuity

Adjustment




With clutch pedal (1) released, adjust switch (2) position so that clearance between end of thread and clutch pedal bracket is within specification.

Clearance between end of thread and clutch pedal bracket
"a": 1.5 - 2.0 mm (0.06 - 0.08 in.)