DTC P0037 Or DTC P0038: Condition
DTC P0037 is set when Engine Control Module (ECM) detects Heated Oxygen Sensor No. 2 (HO2S-2) heater circuit voltage input is higher than 13.63 volts while HO2S-1 heater is ON. DTC P0038 is set when ECM detects HO2S-2 heater circuit voltage input is lower than 0.70 volt while HO2S-2 heater is ON. MIL is illuminated when ECM detects either malfunction during 2 consecutive drive cycles. Possible causes are:
- ECM malfunction.
- HO2S-2 heater malfunction.
- HO2S-2 heater circuit malfunction.