Front Wheel Speed Sensor Removal And Installation: Installation

Check sensor rotor referring to Front Wheel Speed Sensor Rotor On-Vehicle Inspection .
Install it by reversing removal procedure.
CAUTION:
- Do not pull wire harness or twist more than necessary when installing front wheel speed sensor.
- Fit harness grommet to inner fender securely.
Tightening torque
1. Wheel speed sensor clamp bolt (a): 10 N.m (1.0 kg-m, 7.5 lb-ft)
2. Front wheel speed sensor bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)
  
  Fig 1: Installing Front Wheel Speed Sensor
  Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor and knuckle.

Fig 2: Checking That There Is No Clearance Between Sensor & Knuckle
Courtesy of SUZUKI OF AMERICA CORP.