DTC Check
- After setting cartridge to SUZUKI scan tool, connect SUZUKI scan tool to data link connector.
Special tool
- (A): SUZUKI scan tool
- Turn ignition switch to "ON" position.
- Read DTC according to instructions displayed on SUZUKI scan tool and print it or write it down. Refer to SUZUKI scan tool operator's manual for further details.
- After completing the check, turn ignition switch off and disconnect SUZUKI scan tool from DLC.
DTC INDEX
| DTC | Description |
|---|---|
| DTC C1214 | ABS RELAY FAULTY |
| DTC C1215 | IDLE UP CIRCUIT FAULTY |
| DTC C1217/C1242 | PUMP MOTOR CIRCUIT SHORTED TO GROUND / OPEN |
| DTC C1218 / C1243 | PUMP MOTOR GROUND CIRCUIT OPEN, HIGH RESISTANCE OR SHORTED TO BATTERY / PUMP MOTOR STALLED |
| DTC C1221/C1222/C1223/C1224 | WHEEL SPEED SENSOR INPUT SIGNAL = 0 |
| DTC C1225/C1226/C1227/C1228 | EXCESSIVE WHEEL SPEED VARIATION |
| DTC C1232/C1233/C1234/C1235 | WHEEL SPEED SENSOR CIRCUIT OPEN OR SHORTED |
| DTC C1236/C1254 | LOW SYSTEM VOLTAGE/ABNORMAL SHUTDOWN DETECTED |
| DTC C1237 | HIGH SYSTEM VOLTAGE |
| DTC C1255/C1256 | EBCM INTERNAL MALFUNCTION (ABS DISABLED / FUNCTIONAL) |
| DTC C1257 | G SENSOR FAULTY (FOR 4WD VEHICLE) |
| DTC C1258 | 4WD SWITCH CIRCUIT FAULTY |
| DTC C1261/C1262/C1263/C1264/C1267/C1268 | APPLY OR RELEASE SOLENOID SHORTED OR OPEN |
| DTC C1295 | BRAKE LIGHT SWITCH CIRCUIT OPEN |