LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> Vitara 4D Utility, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - On-Vehicle Adjustments) >> Transmission Mode Switch >> Method No. 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Method No. 1

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place transmission selector lever in Neutral. Remove selector lever from automatic transmission mode switch. Remove cover from mode switch.
  2. Loosen (2) 10 mm screws securing mode switch. Rotate mode switch until slot in housing on gear position switch aligns with selector shaft bushing. Insert a 3/32" punch into slot. See Fig 1 .
  3. Tighten mode switch retaining bolts to 113 INCH lbs. (13 N.m). Install shift lever on mode switch and tighten shift lever nut. Install mode switch cover on gear position switch. Install heat protector.
Fig 1: Adjusting Gear Position Switch
G95E20986Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals