Evaporative Emission Control Canister: Service and Repair

EVAP Canister Replacement

WARNING:
The following cautions should be always observed.
- DO NOT smoke and place "NO SMOKING" signs near work area.
- To release fuel vapor pressure in fuel tank, remove fuel tank cap and then reinstall it.




Type A (EVAP canister (1) installed in engine room)
1. Disconnect negative cable at battery.
2. Remove air cleaner upper case with intake air hose.
3. Disconnect hoses from canister (1).
4. Remove canister (1) from vehicle body.
5. Install new canister (1) by reversing removal procedure.
6. Clamp hoses securely.




Type B (EVAP canister (1) installed in front of fuel tank)
Replace EVAP canister (2) with new one referring to "EVAP Canister Check: