Blower Motor Resistor: Service and Repair

Removal




1. Disconnect negative (-) cable (2) at battery (1).
2. Disable air bag system, if equipped. Refer to Disabling Air Bag System:".
3. Open glove box, then remove screw (2).




4. Remove glove box (1).
5. Disconnect resistor coupler.




6. Remove heater blower resistor (1) by loosening its fastening screw (2).

Installation
1. Install heater blower resistor with screws.
2. Enable air bag system, if equipped. Refer to "Enabling Air Bag System:".