Brake Hose/Line: Testing and Inspection

Brake Hose and Pipe Check





The brake hose assembly should be checked for road hazard damage, for cracks and chafing of the outer cover, for leaks and blisters. A light and mirror may be needed for an adequate inspection. If any of the conditions are observed on the brake hose, it is necessary to replace it.
Inspect the pipe for damage, cracks, dents and corrosion. If any defect is found, replace it.




Brake Hoses and Pipes Inspection
Check brake hoses and pipes for proper hookup, leaks, cracks, chafing and other damage.

Replace any of these parts as necessary.

CAUTION: After replacing any brake pipe or hose, be sure to carry out air purge operation.