Clutch Fluid Pipe & Hose Removal and Installation: Notes

Removal

NOTE: Do not allow fluid to get on painted surface.

Remove dust and dirt from each joint of hose (2) and pipe (1) to be disconnected and clean around reservoir cap.
Take out fluid with syringe or such.
Disconnect fluid pipe (1) from hose (2).

NOTE: To disconnect pipe (1) from hose (2), separate them by using flare nut wrench (4) and spanner (3) so as not to kink them.

Fig 1: Disconnecting Fluid Pipe From Hose

Courtesy of SUZUKI OF AMERICA CORP.