Oil Pump Removal & Installation: Installation

Install oil pump (2) to lower crankcase (1) and tighten bolts to specified torque.
NOTE: When installing oil pump, be careful not to allow pins to fall off.

Tightening torque
1. Oil pump mounting bolt (a): 27 N.m (2.7 kg-m, 19.5 lb-ft)
Fig 1: Identifying Oil Pump, Oil Pump Mounting Bolts & Lower Crankcase
Courtesy of SUZUKI OF AMERICA CORP.
Install oil pump sprocket cover (1) and tighten bolts to specified torque.
Tightening torque
1. Oil pump sprocket cover bolt (a): 11 N.m (1.1 kg-m, 8.0 lb-ft)
Fig 2: Identifying Oil Pump Sprocket Cover & Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install oil pan and oil pump strainer. See OIL PAN, OIL PUMP STRAINER REMOVAL & INSTALLATION .
Refill engine with engine oil. See ENGINE OIL & FILTER CHANGE .
Connect negative cable at battery.
After completing installation, check oil pressure by running engine. See OIL PRESSURE CHECK .