Head Lining Removal And Installation: Installation

Reverse removal procedure to install head lining noting the following instructions.

1. Set roof harness (1) and rear washer hose (2) to head lining with adhesive tape (3).
   Fig 1: Installing Head Lining Components

   Courtesy of SUZUKI OF AMERICA CORP.
2. Clean roof where adhesive tape of head lining will be attached.
3. Peel off release liner of adhesive tape on head lining and install it to body.
4. Install assistant grips a, b, c and d in that order.
   Fig 2: Installing Assistant Grips

   Courtesy of SUZUKI OF AMERICA CORP.
5. Install door opening trim (1).
   Fig 3: Installing Door Opening Trim

   Courtesy of SUZUKI OF AMERICA CORP.
6. Install spot light (if equipped), sunshade assembly (2), rear room light (5), speaker cover (if equipped), room light (1) and inner trims (3) covering head lining.
   Fig 4: Installing Head Lining Components And Trim Pieces

   Courtesy of SUZUKI OF AMERICA CORP.