Rear Wheel Speed Sensor Removal And Installation: Installation

Check that no foreign material is attached to sensor and rotor.
Install it by reversing removal procedure.
CAUTION: Do not pull wire harness or twist more than necessary when installing rear wheel speed sensor.

Tightening torque
1. Rear wheel speed sensor bolt (a): 21 N.m (2.1 kg-m, 15.5 lb-ft)
Fig 1: Installing Rear Wheel Speed Sensor To Rear Axle
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor and knuckle.

Fig 2: Checking That There Is No Clearance Between Sensor & Knuckle
Courtesy of SUZUKI OF AMERICA CORP.