Speedometer Driven Gear Removal & Installation: Installation

1. Make sure that O-ring and speed sensor have not have damaged.
2. Insect speedometer driven gear for abnormal wear of gear teeth or bend of shaft portion and replace it if necessary.
3. Make sure its smooth rotation.
4. Install speed sensor assembly (1) to transfer (2) and connect coupler (3) as it was.

1. Tightening torque 
2. Speed sensor mounting bolt (a):  6 N.m (0.6 kg-m, 4.5 lb-ft)

Fig 1: Installing Speed Sensor Assembly

Courtesy of SUZUKI OF AMERICA CORP.