Road Test
WARNING: This page is about a different variant/trim than selected.
This test is to check if upshift and downshift take place at specified speeds while actually driving vehicle on a level road.
WARNING:
- Carry out test in very little traffic area to prevent an accident.
- Test requires 2 persons, a drive and a tester.
- Warm up engine.
- With engine running at idle, shift select lever "D".
- Accelerate vehicle speed by depressing accelerator pedal gradually.
- While driving in "D" range, check if gear shift occurs properly as shown in Gear Shift Diagram. See AUTOMATIC GEAR SHIFT DIAGRAM .