Rear Door Glass Removal And Installation: Installation

Reverse removal sequence to install door glass. However, be careful of the following points.

• Securely seal door sealing cover (1) with adhesive (2).
  Fig 1: Sealing Door Sealing Cover

  Courtesy of SUZUKI OF AMERICA CORP.
• Apply instantaneous adhesive to hatched part "A" between partition glass (2) and partition weather strip (1).
  NOTE:

  • Horizontal adhesive application range should be in 25 - 35 mm (0.98 -1.38 in.) from each convex corner of partition glass.
  • Do not overflow instantaneous adhesive from edge of partition weather strip (1).
  CAUTION: Never use instantaneous adhesive eroding rubber.
  Fig 2: Applying Adhesive

  Courtesy of SUZUKI OF AMERICA CORP.