Input Shaft Disassembly and Assembly: Assembly

Bring bearing (1) so that its groove for circlip is in the front of input shaft (2) and press-fit with special tool and hydraulic press.
Special tool
1. (A): 09940-51710
Fig 1: Press-Fitting Input Shaft Bearing
Courtesy of SUZUKI OF AMERICA CORP.
Select circlip (1) that will make thrust clearance of bearing 0.1 mm (0.0039 in) or less and install it.

Fig 2: Circlip Thickness Specifications Chart
Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Measuring Circlip Thrust Clearance
Courtesy of SUZUKI OF AMERICA CORP.
Apply grease to bearing roller (1) and install it to input shaft (2).
1. Grease: 99000-25010
Fig 4: Installing Bearing Roller To Input Shaft
Courtesy of SUZUKI OF AMERICA CORP.