DTC Confirmation Procedure
WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
- Intake air temp.: - 14°C, 6.8°F or higher.
- Altitude (barometric pressure): 2500 m, 8202 ft or less (560 mmHg, 75 kPa or more)
- With ignition switch turned OFF, connect scan tool.
- Turn ON ignition switch and clear DTC using scan tool.
- Start engine and run it for 30 sec. or more.
- Check DTC and pending DTC.