Scan Tool Data Definitions
TEMP CONT SWITCH: Position of temperature control selector of HVAC control module
CABIN TEMPERATURE: In-air temperature detected by inside air temperature sensor installed in HVAC control module
OUTSIDE AIR TEMP: Outside air temperature detected by outside air temperature sensor installed on 4WD air pump assembly bracket in front bumper
EVAPORATOR TEMP: Temperature of air passed through evaporator
COOLANT TEMP: Engine coolant temperature detected by engine coolant temperature sensor
SUNLOAD: Amount of sunlight detected by sunload sensor installed on the driver side on the dashboard
MODE CONT SWITCH: Position of airflow selector of HVAC control module
FAN CONT SWITCH: Position of air speed selector of HVAC control module
FAN DESIRE VOLT: Voltage for blower motor
AIR MIX POS SENSOR: Input signal from position sensor in temperature control actuator
MODE POS SENSOR: Input signal from position sensor in air flow control actuator
A/C CONT SIG (ON or OFF): State of A/C indicator lamp
BLOWER FAN LOAD (ON or OFF): ON: Position of blower speed selector is 1st or 2nd position / OFF: Position of blower speed selector is more than 3rd position.
AIR INTAKE MODE (FRE, REC or MIX): State of air intake mode
A/C INDICATOR LAMP (ON or OFF): State of A/C indicator lamp
REC INDICATOR LAMP (ON or OFF): State of recirculation air (REC) indicator lamp