LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> Aerio SX, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Engine Sensors & Switches >> Manifold Absolute Pressure Sensor >> Aerio
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure Sensor: Aerio

  1. Disconnect MAP sensor from connector and remove. Measure voltage between "Vout" and "Ground" according to test procedures found in Fig 1 . Refer to MAP SENSOR OUTPUT SIGNAL (AERIO)  for voltage specifications and test conditions.
  2. If voltage is not within specification, replace MAP sensor.
    MAP SENSOR OUTPUT SIGNAL (AERIO)

    Altitude (Feet) Vacuum (In. Hg) Output Voltage
    0-2000 29.9-27.8 3.3-4.3
    2001-5000 27.8-24.9 3.0-4.1
    5001-8000 24.9-22.3 2.7-3.7
    8001-10,000 22.3-20.7 2.5-3.3
Fig 1: Testing MAP, MDP & FTP Sensors
G96H09891Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals