DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition switch to LOCK position. Connect SUZUKI scan tool or equivalent to DLC, located below left side of instrument panel. See Figure . Turn ignition switch to ON position. Using scan tool, clear DTCs. see CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Start engine and allow it to idle until reaches normal operating temperature. Using scan tool, check for current or pending DTC. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If same DTC P0112 resets, see DIAGNOSIS & REPAIR PROCEDURE .