DTC Confirmation Test

Ensure intake air temperature is 6.8°F (-14°C) or more, vehicle is at an altitude of 8000 feet or below, and barometric pressure is 75 kPa or more. Turn ignition switch to LOCK position. Connect SUZUKI scan tool or equivalent to DLC. See Figure. Turn ignition switch to ON position. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES  under SELF-DIAGNOSTIC SYSTEM. Start engine and allow it to reach normal operating temperature. Drive vehicle with engine speed at 3000-4000 RPM for 30 seconds or more. Stop vehicle. Using scan tool, check for current or pending DTC. See RETRIEVING DIAGNOSTIC TROUBLE CODES  under SELF-DIAGNOSTIC SYSTEM. If DTC P0101 resets, see DIAGNOSIS & REPAIR PROCEDURE .