Front Wheel Speed Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
- Check that no foreign material is attached to sensor (1) and sensor ring (2).
- Install it by reversing removal procedure.
Tightening torque
Front wheel speed sensor bolt (a): 23 N.m (2.3 kg-m, 17.0 lb-ft)
CAUTION: Do not pull or twist wire harness more than necessary when installing front wheel speed sensor. - Check that there is no clearance between sensor and knuckle.