Clutch Pedal Position (CPP) Switch for Cruise Control Removal and Installation: Installation
- Install CPP switch (1) to pedal bracket (2).
- Pull up clutch pedal (3).
- Adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.
Clearance "a" between end of thread and clutch pedal bracket
1.5 - 2.0 mm (0.06 - 0.08 in)
- Tighten lock nut to specified torque.
Tightening torque
CPP switch lock nut (a): 7.5 N.m (0.75 kg-m, 5.5 lb-ft)
- Connect connector to CPP switch (1) securely.