Front Door Window Glass: Service and Repair

Front Door Glass Removal and Installation

Front Door Window Components:

Removal
1. Remove inside handle bezel (1).
2. Remove inside door grip cover (2), and then remove door trim mounting bolts (3).







3. Remove door trim (1).
With inside handle bezel (2) tilted as shown.
And disconnect power window switch lead wire at coupler.







4. Remove door sealing cover (1).







5. Remove outer weather-strip (1). Do not deform it when removal.
Lower window all the way down. Then, use a tape-wrapped putty knife to pry off outer weather-strip.







6. Remove door glass mounting screws (1).
7. Remove door glass (2) while tilting it as shown.







Installation
Reverse removal procedure noting the following instructions.
- If there is deformity for glass run, replace new one.
- Tighten door glass rear mounting screw (1) first, and then tighten door glass front mounting screw (2).







- Secure door sealing cover (1) with adhesive (2).







- Tighten front door outer weather-strip mounting screw as specified torque.

Tightening torque
Front door outer weather-strip mounting screw (a): 1.5 N.m (0.15 kg-m, 1.0 lbf-ft)