Ignition Switch: Service and Repair

Removal
1. Disconnect negative cable at battery.
2. Disable air bag system. Refer to "Disabling Air Bag System".
3. Remove steering lock assembly (ignition switch) from steering column referring to "Steering Lock Assembly (Ignition Switch) Removal and Installation"

Installation
1. Install steering lock (ignition switch) to steering column referring to "Steering Lock Assembly (Ignition Switch) Removal and Installation"
2. Enable air bag system. Refer to "Enabling Air Bag System".

NOTE: When installing steering column, special care must be taken for tightening sequence and its torque.