LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2002 >> XL-7 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Air Bag Restraint Systems) >> Disposal Procedures >> Off-Vehicle Deployment >> Deploying Driver-side AIR Bag Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Deploying Driver-side AIR Bag Module

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clear space on ground 6 feet (1.8 m) in diameter (paved outdoor location is recommended). Ensure no loose or flammable objects are within deployment area. Place driver-side air bag module in center of deployment area with trim cover facing upwards.
  2. Using Deployment Harness (09932-75030), short both deployment harness leads together by fully seating one banana plug into the other. Connect deployment harness connector to air bag module connector. Lock connector with lock lever. Stretch harness to its full length of 33 feet (10 m).
    NOTE: Air bag will deploy immediately when power source is connected. Deployment wires must remain shorted and not be connected to power source until air bag is to be deployed. Connecting deployment wires to power source should always be the final step in deployment procedure.
  3. Separate banana plugs on deployment harness. Connect harness to a 12-volt battery to deploy driver-side air bag module. DO NOT touch air bag module for 30 minutes due to heat generated during deployment. Wear gloves and safety glasses while handling a deployed air bag module. Wash hands with soap and water afterward.
scientia non olet · About LEMON Manuals