Sunload Sensor Inspection

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove sunload sensor. Refer to Removal .
Light over the sensor vertically with an incandescent lamp of approximately 100 watt.
The distance between the sensor and the lamp should be approximately 100 mm (3.94 in.).
Measure the voltage between the terminals with the (+) probe on the terminal "a" and the (-) probe on the terminal "b".
Make sure if the voltage is approximately 0.38 - 0.42 V. If not, replace the sensor with the new one.
Sunload sensor specifications
1. "a" - "b": Approx. 0.38 - 0.42 V

Fig 1: Replacing Sensor

Courtesy of SUZUKI OF AMERICA CORP.