Receiver / Dryer Removal and Installation for H25 Engine Model: Installation
WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal sequence to install desiccant, according to instruction manual with supply parts.
NOTE:
- When replacing desiccant, add 40 cc of refrigerating oil the same as compressor oil.
- Do not remove desiccant from the plastic bag until just before inserting it into the receiver / dryer.
- Install the desiccant (1) with its double-layer portion facing the bottom of receiver / dryer.
- If desiccant cap installing is bolt type, tighten specified torque for its bolt.
Tightening torque
- Cap: 12.5 N.m (1.25 kg-m, 9 +/- 1.8 lb-ft)