A/C Evaporator Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure to install A/C evaporator nothing the following instructions.

Install uniformly the evaporator packing to dash panel hole for expansion valve.
NOTE: When the A/C evaporator temperature sensor removed, it should be reinstalled in original position. If cooling unit or evaporator is replaced, pour 50 cc of refrigerating oil to compressor suction-side.
Enable air bag system.
For H25 engine model, refer to AIR BAG RESTRAINT SYSTEMS .

For H27 engine model, refer to AIR BAG RESTRAINT SYSTEMS .
Evacuate and charge system according to OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .