Not Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Check A/C switch indictor (6) for operation referring to A/C INDICATOR LAMP CHECK .
Set the following selectors to specified positions respectively.
- Temperature selector (1): Max cool position
- Air flow selector (2): "VENT" position.
- Blower speed selector (3): "OFF" position.
Turn ignition switch ON position under the conditions set at the Step 2 by pushing the A/C switch (4) and air intake switch (5) at the same time.
Push A/C switch and air intake switch at the same time.
Make sure that rear defogger lamp is lighted.
Push rear defogger switch (7) at 3 seconds or more.

Fig 1: Identifying A/C Switch Indicator
Courtesy of SUZUKI OF AMERICA CORP.
After completing the clearance, turn ignition switch OFF position.
Perform DTC CHECK , and confirm if normal DTC is displayed and if any other DTC is detected.