Steering Lock Assembly (Ignition Switch) Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Remove steering column assembly. Refer to Steering Column Removal and Installation .
- Using center punch (with sharp point) (1) as shown in the figure, loosen and remove steering lock mounting bolts (2).NOTE: Use care not to damage aluminum part of steering lock body (3) with center punch (1).
- Turn ignition key to ACC or ON position and remove steering lock assembly (3) from steering column assembly (4).