Manual Selector Assembly Components: Installation

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure to install manual selector assembly noting the following instructions.

Make sure that select cable clip (3) holds select cable (1) on manual selector assembly (2) securely.
Tighten manual selector assembly mounting bolts to specified torque.
Tightening torque
1. Manual selector assembly mounting bolt: 18 N.m (1.8 kg-m, 13.5 lb-ft)

Fig 1: Installing Manual Selector Assembly

Courtesy of SUZUKI OF AMERICA CORP.