Input Shaft Speed Sensor Inspection

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable at battery.
Hoist vehicle.
Disconnect input shaft speed sensor connector.
Check input shaft speed sensor (1) for resistance between terminals of sensor.
Input shaft speed sensor resistance
1. Standard: 560 - 680 ohms (at 20 °C (68 °F))

Fig 1: Checking Input shaft Speed Sensor Resistance

Courtesy of SUZUKI OF AMERICA CORP.