Time Lag Test: Notes
WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
This test is to check conditions of clutch, reverse brake and fluid pressure. "Time lag" means time elapsed since select lever is shifted with engine idling till shock is felt.
- With chocks placed before and behind front and rear wheels respectively, depress brake pedal.
- Start engine.
- With stop watch ready, shift select lever from "N" to "D" range and measure time from that moment till shock is felt.
- Similarly measure time lag by shifting select lever from "N" to "R" range.
Specification for time lag
"N" --> "D": Less than 1.2 sec.
"N" --> "R": Less than 1.5 sec.
NOTE:
- When repeating this test, be sure to wait at least minute after select lever is shifted back to "N" range.
- Engine should be warmed up fully for this test.