Rear Upper Valve Body Components: Disassembly

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Take out 6 valve body balls (1).

Fig 1: Removing Out Valve Body Balls
Courtesy of SUZUKI OF AMERICA CORP.
With 3-2 kick down control valve plug (1) pressed with finger, take out needle roller (2) with magnet (3). Then remove 3-2 kick down control valve plug (1), clutch sequence valve and reverse brake sequence valve spring.

Fig 2: Removing Out Needle Roller With Magnet
Courtesy of SUZUKI OF AMERICA CORP.
With shift valve plug (1) pressed with finger, take out shift valve retainer (2) with magnet and then remove shift valve plug (1) and 3-4 shift valve spring.

Fig 3: Removing Out Shift Valve Retainer
Courtesy of SUZUKI OF AMERICA CORP.
Remove 2 plate bolts. Then remove rear upper valve body plate (1) and rear upper valve body gasket and take out 1-2 shift valve and shift valve spring.

Fig 4: Removing Plate Bolts
Courtesy of SUZUKI OF AMERICA CORP.
With shift valve plug (1) pressed with finger, remove valve retainer with magnet (2) and then remove shift valve plug (1), 2-3 shift valve and shift valve spring.

Fig 5: Removing Valve Retainer With Magnet

Courtesy of SUZUKI OF AMERICA CORP.