Manual Selector Assembly Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure to install manual selector assembly noting the following instructions.

Make sure that selector cable clip (3) holds selector cable (1) on manual selector assembly (2) securely.

Fig 1: Making Sure That Selector Cable Clip Holds Selector Cable
Courtesy of SUZUKI OF AMERICA CORP.
Connect interlock cable end to cam referring to INSTALLATION in "Key Interlock Cable Removal and Installation: 4 A/T".
Tighten manual selector assembly mounting bolts as specified torque.
Tightening torque
1. Manual selector assembly mounting bolts: 18 N.m (1.8 kg-m, 13.5 lb-ft)
Upon completion of installation, confirm that brake (key) interlock system operates properly.